KRAFT horse walkers are fitted out with a modern control system; electronic components control all functions on the installation.
Depending on specific customer requirements, KRAFT offers one version with a standard control system in 6 different versions as well as one version with a programmable control system in 2 different versions.
The customer receives a detailed operating manual for every KRAFT horse walker.
Power supply: 220 volt/16 amps, suitable for use with a frequency converter
The standard control system:
Functions
On / Off
Direction
Speed
The programmable control system:
Functions
On / Off
Speed
9 training versions for various speeds and changes of direction
The standard control system
Type A: with an electrical auxiliary drive
Type B: with an electrical auxiliary drive and coin-operated machine
Type C: with an electrical auxiliary drive and automatic left-right switch
Type D: with an electrical auxiliary drive and automatic left-right switch and coin-operated machine
Type E: with an electrical auxiliary drive and walk-trot programme
Type F: with an electrical auxiliary drive, walk-trot programme and coin-operated machine
Control system with a PLC
Type G: PLC control system with an electrical auxiliary drive
Type H: PLC control system with an electrical auxiliary drive and coin-operated machine
