Partition grilles
Partition grilles are installed to break up the circular running track into segments so that a number of horses can be safely trained independently of each other.
The partition grilles are fastened at a height of 2300 mm.
KRAFT recommends a minimum length of 7 m. per segment so that the horse has sufficient room to move around.
The number of segments made depends on the size of the installation.
An example for round horse walkers:
| External dimension |
15 m. = 6 horses |
| Circumference |
47 m : 6 = 7.8 m. per segment |
An example for oval horse walkers:
| External dimension |
10 x 20 m. = 6 horses |
| Circumference |
51 m : 6 = 8.5 m. per segment |
Partition grille, type A
|
|
|
- galvanised metal grille (replaceable)
- continuous rubber strips 800 mm. long
- electrical auxiliary drive possible
|
Partition grille, type B
|
|
|
- galvanised metal grille (replaceable)
- below with the round end pipe
- with 4 rubber strips each 1100 mm. long with chains
- electrical auxiliary drive possible
|
Partition grille, type C
|
|
|
- a perforated rubber plate, 1800 mm. high
- high strength elastic material with an insert
- electrical auxiliary drive possible (special electrically conductive material)
|
New! First in the world!
Kraft Retractable Separation Gate, Type D
This system is patented by the Kraft Company!
|
|
|
- The walking surface can easily be cleaned.
- If footing materials need to be changed, then there is no separation gate in the way.
- When the separation gate is raised the walker can also be used for warm up and turn out.
- Minimal risk of injury due to the conductive rubber separation gates.
|
|
|
|
