Ceiling Mounted Horse Walker with Lunging Ring

The ceiling mounted walker contains a spacious inner area that is very suitable for lunging.
The complete roof allows for year-round use of the lunging pen and walker.

Technical Information

  • Planning, structural engineering, design, timely installation as well as concrete work, turnkey construction
  • Varieties of hanging/rotating gates (see technical spec sheet number 1)
  • Various control panel configurations (see technical spec sheet number 2)
  • Optional irrigation system (see technical spec sheet number 3)
  • Varieties of roofing materials (see technical spec sheet number 4)
  • Traditional hinged or sliding gates (see technical spec sheet number 5)
  • Covered entry with flat or gable roof (see technical spec sheet number 6)
  • Various fence styles (see page 3)
  • For 4 - 10 horses, 39' to 131' (12 - 40 m) diameters
  • Industrial belt drive, low maintenance and quiet
  • Simple operation, sturdy construction and high safety standards
  • All products can be custom designed according to client needs. Optional self-installation available
Ceiling Mounted Walker, round, open inner area for lunging

Sample of Fence Varieties

The inner and outer fences are important functional components of every horse walker and also affect the safety of both horse and rider.
Kraft Ceiling Mounted Walkers with lunging ring are designed with 12 columns (12-sided) and the inner and outer fences are 24-sided which creates a nearly round fence structure.

Inside Fences



Fence Type H / Fence Type I
Fence Type H
  • as Type I below, but with spruce boards
Fence Type I (picture)
  • horizontal hard wood boards, 1.5" (40 mm) thick
  • solid up to 6.5' (2 m), with top bite guard
  • with middle post to create 24 sides
Fence Type J / Fence Type K
Fence Type J
  • as Type K below, but with spruce boards
Fence Type K (picture)
  • horizontal hard wood boards, 1.5" (40 mm) thick
  • solid up to 5' (1.5 m)
  • from 5' (1.5 m) to 6.5' (2 m) with galvanized framed pipe or welded wire
  • with middle post to create 24 sides
Fence Type L
  • double sided wall, outside is 12-sided board and batten
  • solid up to 6.5' (2 m)
  • inside is 24-sided 1.25" (32 mm) tongue and grove boards
Panel Fence Type A
  • hot-dipped galvanized panel fence
  • solid up to 5' (1.5 m) with hard wood boards
Panel Fence Type B
  • hot-dipped galvanized panel fence
  • solid up to 5' (1.5 m) with spruce boards
  • tongue and grove, planed, pressure treated
  • from 5' (1.5 m) to 6' (1.8 m) with galvanized pipe or welded wire