We use cookies to give you the best experience of our website. By browsing you agree to our use of cookies.
Our Cookie Policy Turn cookies off Allow cookies
Turn cookies on for a better website experience.
Our Cookie Policy Allow cookies

Partition grilles

Partition grilles are installed to break up the circular running track into segments so that a number of horses can be safely trained independently of each other. The partition grilles are fastened at a height of 2300 mm.

KRAFT recommends a minimum length of 7 m. per segment so that the horse has sufficient room to move around.
The number of segments made depends on the size of the installation.

An example for round horse walkers:
External dimension 15 m. = 6 horses
Circumference 47 m : 6 = 7.8 m. per segment
An example for oval horse walkers:
External dimension 10 x 20 m. = 6 horses
Circumference 51 m : 6 = 8.5 m. per segment
Partition grille, type A
  • galvanised metal grille (replaceable)
  • continuous rubber strips 800 mm. long
  • electrical auxiliary drive possible
Partition grille, type C
  • a perforated rubber plate, 1800 mm. high
  • high strength elastic material with an insert
  • electrical auxiliary drive possible (special electrically conductive material)
New! First in the world!
Kraft Retractable Separation Gate, Type D
This system is patented by the Kraft Company!
  • The walking surface can easily be cleaned.
  • If footing materials need to be changed, then there is no separation gate in the way.
  • When the separation gate is raised the walker can also be used for warm up and turn out.
  • Minimal risk of injury due to the conductive rubber separation gates.
Technical Spec Sheets

New! First in the world! - Kraft Retractable Separation Gate, Type D